|
See details
|
NC8700-EN8AA Enecharger NiCd/NiMH
The enecharger is a fully automatic quick charger designed for 1 to 8 Ni-Cd or Ni-MH AAA & AA cells. This model also includes 8 x Sanyo Eneloop AA cells Specially designed for rechargeable batteries used in digital and audio products. The enecharger has the following features: - Recharges 1 to 8 pcs of any mix* of AA and AAA batteries at a time.
- Powered by an external AC switching mode adaptor with worldwide input (100 - 240VAC 50/60Hz)
- Includes 12V car lighter adaptor
- 8 independent channels with individual LED display for proper charge, discharge & trickle charge
- Intelligent microprocessor controlled
- With negative delta V cut-off function
- Ni-MH & Ni-Cd batteries can be mixed to charge at the same time
- Temperature sensors to avoid the battery from being damaged by over-heating
- With mechanical & electrical protection against wrong polarity
- With maximum charging timer control for overcharge protection
- Fast charge rate - 700mA
Charge times Battery Capacity, Size, Chemistry & Charge time - 2700mAh AA NiMH 340 minutes
- 2500mAh AA NiMH 300 minutes
- 2300mAh AA NiMH 270 minutes
- 2100mAh AA NiMH 250 minutes
- 2000mAh AA NiMH 240 minutes
- 1700mAh AA NiMH 205 minutes
- 1000mAh AA NiCd 120 minutes
- 1000mAh AAA NiMH 120 minutes
- 900mAh AAA NiMH 110 minutes
- 800mAh AAA NiMH 95 minutes
*Whilst this charger can charge any mix of NiMH or NiCd AA/AAA batteries at the same time it is not recommended to use a mix of different batteries together in your battery powered equipment. It is not recommended to charge cells below 700mAh on this charger. Use a lower output current charger for lower capacity cells. |
Our price: $81.38 (AUD 81.38)
including GST 10.00%
|
|
See details
|
NC8700 Enecharger NiCd/NiMH
|
The enecharger is a fully automatic quick charger designed for 1 to 8 Ni-Cd or Ni-MH AAA & AA cells.
Specially designed for rechargeable batteries used in digital and audio products. The enecharger has the following features:
- Recharges 1 to 8 pcs of any mix* of AA and AAA batteries at a time.
- Powered by an external AC switching mode adaptor with worldwide input (100 - 240VAC 50/60Hz)
- Includes 12V car lighter adaptor
- 8 independent channels with individual LED display for proper charge, discharge & trickle charge
- Intelligent microprocessor controlled
- With negative delta V cut-off function
- Ni-MH & Ni-Cd batteries can be mixed to charge at the same time
- Temperature sensors to avoid the battery from being damaged by over-heating
- With mechanical & electrical protection against wrong polarity
- With maximum charging timer control for overcharge protection
- Fast charge rate - 700mA
Charge times
Battery Capacity, Size, Chemistry & Charge time
- 2700mAh AA NiMH 340 minutes
- 2500mAh AA NiMH 300 minutes
- 2300mAh AA NiMH 270 minutes
- 2100mAh AA NiMH 250 minutes
- 2000mAh AA NiMH 240 minutes
- 1700mAh AA NiMH 205 minutes
- 1000mAh AA NiCd 120 minutes
- 1000mAh AAA NiMH 120 minutes
- 900mAh AAA NiMH 110 minutes
- 800mAh AAA NiMH 95 minutes
*Whilst this charger can charge any mix of NiMH or NiCd AA/AAA batteries at the same time it is not recommended to use a mix of different batteries together in your battery powered equipment.
It is not recommended to charge cells below 700mAh on this charger. Use a lower output current charger for lower capacity cells. |
Our price: $52.02 (AUD 52.02)
including GST 10.00%
|
|
See details
|
NC42000-EN4 Sanyo NiMH/NiCd Battery Charger
| The NC42000-EN4 enecharger is a fully automatic fast charger designed for 1 to 4 Ni-MH AAA & AA cells and includes 4 x Sanyo Eneloop AA batteries. Specially designed for rechargeable batteries used in digital and audio products. The NC42000 enecharger has the following features: - Recharges 1, 2,3 or 4 pcs of AA or AAA batteries at a time.
- Powered by an external AC switching mode adaptor with worldwide input (100 - 240VAC 50/60Hz)
- Includes 12V car lighter adaptor
- 4 independent individual cell channels each with an LCD display.
- Intelligent microprocessor controlled
- Negative delta V automatic cut-off function
- Temperature sensors to avoid the battery from being damaged by over-heating
- Reverse polarity protection
- With maximum charging safety timer control for overcharge protection
- Fast charge rates AC or 12VDC input AA 2000mA, AAA 850mA.
- Includes four Eneloop HR-3UTG AA NiMH batteries. Made by Sanyo, the world largest manufacturer of rechargeable AA batteries, Eneloop is the world's first ready to use rechargeable NiMH battery. Eneloop is a high performance, low self discharge battery that's ready to use straight from the packet. Once recharged it's still 85% charged after one year & 70% charged two years. Eneloop offers up to 4.4 times the life of an alkaline battery per charge then can be recharged up to 1000 times.
- Charge time for the Eneloop HR-3UTG batteries in this charger is approx' 60 minutes.
|
Our price: $59.27 (AUD 59.27)
|
|
See details
|
NC42000 Sanyo NiMH/NiCd Battery Charger
| The NC42000 enecharger is a fully automatic fast charger designed for 1 to 4 Ni-MH AAA & AA cells . Specially designed for rechargeable batteries used in digital and audio products. The NC42000 enecharger has the following features: - Recharges 1, 2,3 or 4 pcs of AA or AAA batteries at a time.
- Powered by an external AC switching mode adaptor with worldwide input (100 - 240VAC 50/60Hz)
- Includes 12V car lighter adaptor
- 4 independent individual cell channels each with an LCD display.
- Intelligent microprocessor controlled
- Negative delta V automatic cut-off function
- Temperature sensors to avoid the battery from being damaged by over-heating
- Reverse polarity protection
- With maximum charging safety timer control for overcharge protection
- Fast charge rates AC or 12VDC input AA 2000mA, AAA 850mA.
Charge times Battery Capacity, Size, Chemistry & Charge time- 2700mAh NiMH AA 95 minutes
- 2500mAh NiMH AA 90 minutes
- 2000mAh NiMH AA 70 minutes
- 1700mAh NiMH AA 60 minutes
- 1000mAh NiMH AAA 85 minutes
- 800mAh NiMH AAA 70 minutes
|
Our price: $41.56 (AUD 41.56)
|
|
See details
|
NC41500USB-EN4 Sanyo NiMH/NiCd Battery Charger
| The NC41500USB-EN4 enecharger is a fully automatic quick charger designed for 2 or 4 Ni-MH AAA & AA cells and includes 4 x Sanyo Eneloop AA batteries. Specially designed for rechargeable batteries used in digital and audio products. The NC41500USB enecharger has the following features: - Recharges 2 or 4 pcs of AA and AAA batteries at a time.
- Powered by an external AC switching mode adaptor with worldwide input (100 - 240VAC 50/60Hz)
- Includes 12V car lighter adaptor
- Includes USB cable for connection to powered USB devices.
- Circuit protection against damaging powered devices supply the USB input power
- 2 independent channels with individual cell LCD displays
- Intelligent microprocessor controlled
- Negative delta V automatic cut-off function
- Temperature sensors to avoid the battery from being damaged by over-heating
- Reverse polarity protection
- With maximum charging safety timer control for overcharge protection
- Fast charge rates AC or 12VDC input AA 1500mA, AAA 600mA. USB input AA/AAAx2 560mA, AA/AAAx4 280mA.
- Includes four Eneloop HR-3UTG AA NiMH batteries. Made by Sanyo, the world largest manufacturer of rechargeable AA batteries, Eneloop is the world's first ready to use rechargeable NiMH battery. Eneloop is a high performance, low self discharge battery that's ready to use straight from the packet. Once recharged it's still 85% charged after one year & 70% charged two years. Eneloop offers up to 4.4 times the life of an alkaline battery per charge then can be recharged up to 1000 times.
- Charge time for the Eneloop HR-3UTG batteries in this charger is approx' 90 minutes.
|
Our price: $45.19 (AUD 45.19)
|
|
See details
|
NC41500USB-28AA4 Sanyo NiMH/NiCd Battery Charger
| The NC41500USB enecharger is a fully automatic quick charger designed for 2 or 4 Ni-MH AAA & AA cells and includes 4 x Camplus 2800mAh AA batteries. Specially designed for rechargeable batteries used in digital and audio products. The NC41500USB enecharger has the following features: - Recharges 2 or 4 pcs of AA and AAA batteries at a time.
- Powered by an external AC switching mode adaptor with worldwide input (100 - 240VAC 50/60Hz)
- Includes 12V car lighter adaptor
- Includes USB cable for connection to powered USB devices.
- Circuit protection against damaging powered devices supply the USB input power
- 2 independent channels with individual cell LCD displays
- Intelligent microprocessor controlled
- Negative delta V automatic cut-off function
- Temperature sensors to avoid the battery from being damaged by over-heating
- Reverse polarity protection
- With maximum charging safety timer control for overcharge protection
- Fast charge rates AC or 12VDC input AA 1500mA, AAA 600mA. USB input AA/AAAx2 560mA, AA/AAAx4 280mA.
- Includes four Camplus 2800mAh AA NiMH batteries.
- Charge time for these batteries in this charger is approx' 130 minutes.
|
Our price: $39.33 (AUD 39.33)
|
|
|