Intelligent Microprocessor controlled Lithium Ion Camcorder/Digital Camera battery pack charger for almost all brands & types.
Also charges AA/AA Nicad/NiMH cells.
Input 100V-240V AC or 12V DC. Adaptor plates & power supplies included.

With the eneloop battery kit the user has a complete battery solution for most needs.

Eneloop saves money, offers high performance and is environmentally friendly. A donation is made to Clean Up Australia from the sale of every eneloop battery kit.

The enecharger is a fully automatic quick charger designed for 1 to 8 Ni-Cd or Ni-MH AAA & AA cells. 

Specially designed for rechargeable batteries used in digital and audio products. The enecharger has the following features:

• Recharges 1 to 8 pcs of any mix* of AA and AAA batteries at a time.
• Powered by an external AC switching mode adaptor with worldwide input (100 - 240VAC 50/60Hz)
• Includes 12V car lighter adaptor
• 8 independent channels with individual LED display for proper charge, discharge & trickle charge
• Intelligent microprocessor controlled
• With negative delta V cut-off function
• Ni-MH & Ni-Cd batteries can be mixed to charge at the same time
• Temperature sensors to avoid the battery from being damaged by over-heating
• With mechanical & electrical protection against wrong polarity
• With maximum charging timer control for overcharge protection
• Fast charge rate - 700mA

Charge times
Battery Capacity, Size, Chemistry & Charge time

• 2700mAh AA NiMH 340 minutes
• 2500mAh AA NiMH 300 minutes
• 2300mAh AA NiMH 270 minutes
• 2100mAh AA NiMH 250 minutes
• 2000mAh AA NiMH 240 minutes 
• 1700mAh AA NiMH 205 minutes
• 1000mAh AA NiCd 120 minutes
• 1000mAh AAA NiMH 120 minutes
• 900mAh AAA NiMH 110 minutes
• 800mAh AAA NiMH 95 minutes

*Whilst this charger can charge any mix of NiMH or NiCd AA/AAA batteries at the same time it is not recommended to use a mix of different batteries together in your battery powered equipment.
It is not recommended to charge cells below 700mAh on this charger. Use a lower output current charger for lower capacity cells.

1 to 10 x AA or AAA NiCd & NiMH individual circuit Smart Charger.

Suitable for AA cells of up to 2100mAh.
Output for 1-10 cells AA or AAA is 210mA +/- 5%.
Charge termination automatic via -deltaV shut off to trickle charge.
Input 240VAC AC/DC adaptor or 12VDC cigarette adaptor plug for car use.

Specially designed for rechargeable batteries used in digital and audio products. The NC41500USB enecharger has the following features:

• Recharges 2 or 4 pcs of AA and AAA batteries at a time.
• Powered by an external AC switching mode adaptor with worldwide input (100 - 240VAC 50/60Hz)
• Includes 12V car lighter adaptor
• Includes USB cable for connection to powered USB devices.
• Circuit protection against damaging powered devices supply the USB input power
• 2 independent channels with individual cell LCD displays
• Intelligent microprocessor controlled
• Negative delta V automatic cut-off function
• Temperature sensors to avoid the battery from being damaged by over-heating
• Reverse polarity protection
• With maximum charging safety timer control for overcharge protection
• Fast charge rates AC or 12VDC input AA 1500mA, AAA 600mA. USB input AA/AAAx2 560mA, AA/AAAx4 280mA.
• Includes four Eneloop HR-3UTG AA NiMH batteries. Made by Sanyo, the world largest manufacturer of rechargeable AA batteries, Eneloop is the world's first ready to use rechargeable NiMH battery. Eneloop is a high performance, low self discharge battery that's ready to use straight from the packet. Once recharged it's still 85% charged after one year & 70% charged two years. Eneloop offers up to 4.4 times the life of an alkaline battery per charge then can be recharged up to 1000 times.
• Charge time for the Eneloop HR-3UTG batteries in this charger is approx' 90 minutes.